Single-family home
Your house as a power plant.
Heat and power from pellets, stored and controlled — so your house depends less on the grid and keeps running during an outage.
The situation
Many devices do not make a system.
PV on the roof, a heat pump, maybe a small battery: many households have invested. Yet the house still depends on the grid in winter, and in an outage much of it often stops — because the parts were not planned as one system.
What matters to you
Being less dependent, staying supplied during outages, keeping energy costs under control — with a system that simply works and is designed for decades.
When the question comes up
- New build or renovation
- The old heating system needs replacing
- The PV system should deliver more
- Energy costs are rising
- Preparing for a longer power cut
What COR contributes
Generate. Store. Control. For your house.
Generate
COR.gen
COR.gen heats with pellets and generates power at the same time — up to 10 kW heat and up to 2.2 kW power, in the heating season, when PV delivers little. Available in COR.set.
Store
COR.stor
COR.stor stores 70 kWh usable — from PV and COR.gen — and takes over in typically 20 milliseconds when the grid fails.
Control
COR.app
The controls regulate heat and power based on what you need. You see the status in the COR.app.
In numbers
What can be measured.
Switchover on grid failure
Datasheet: typical, 80 ms maximum.
Storage, usable
80 kWh installed, 10 kWh reserve.
Heat
Modulating from 3.1 kW.
Power
In the heating season.